Pack & Carry Fireplace XL Setup Guide
By Snow Peak USA - Japanese-Designed Camping Gear | Published: 2026-10-19
Category: How-to Guides
Learn how to set up the Snow Peak Pack & Carry Fireplace XL for safe backyard fires. Step-by-step instructions, common mistakes, and practical tips.
Quick Answer
Set up the Pack & Carry Fireplace XL on a level, non-combustible surface, unfold it fully, and secure the legs before lighting your fire.
Why the XL is a backyard favorite
The Pack & Carry Fireplace XL is Snow Peak's largest collapsible fireplace, designed for at-home gatherings. Its stainless steel build and vent holes promote airflow, helping your fire burn more efficiently and reducing smoke.
Because it folds flat, it stores easily between uses. But its size means you need a clear, open area—keep at least 10 feet from structures and overhanging branches.
What to avoid when setting up
The most common mistake is placing the fireplace on grass or a wooden deck. Even with legs, heat radiates downward and can scorch surfaces. Always use a fire-resistant mat or a stone/paver base.
Another frequent error is not fully locking the legs. The four legs provide stability, but if they're not fully extended, the unit can wobble when you add logs. Check each leg before lighting.
Step-by-Step Setup
- Choose a safe location: Place the fireplace on a level, non-combustible surface like concrete, stone, or a fire-resistant mat. Keep it at least 10 feet from your house, deck railings, and low-hanging branches. Never place it directly on grass or a wooden deck.
- Unfold the fireplace: Lift the folded unit and gently pull the sides apart until the walls are fully extended. Make sure all panels are aligned and the bottom sits flat on the ground. Check that no panels are pinched or misaligned before proceeding.
- Extend and lock the legs: Push each of the four legs outward until they click into place. Gently rock the fireplace to confirm it's stable. If any leg feels loose, adjust it before use. A wobbly fireplace is a fire hazard—always test stability first.
- Prepare the fire: Place a small amount of kindling in the center of the firebox. Add a fire starter or crumpled paper, then light it. Once the kindling catches, add larger logs gradually. Don't overload the firebox—keep logs below the top edge for better airflow.
- Monitor and extinguish: Keep a bucket of water or a hose nearby. When you're done, let the fire burn down to ash, then douse thoroughly with water and stir. Never leave embers unattended. Make sure the fireplace is completely cool before folding and storing.
Product at a Glance
- Pack & Carry Fireplace XL: The Pack & Carry Fireplace XL is Snow Peak's largest collapsible fireplace, featuring vent holes for airflow and four legs for stability. The vent holes help your fire burn more efficiently, while the stable legs make it a safe choice for backyard use.
Pack & Carry Fireplace XL
