How to Set Up a Wing Pole 280cm Aluminum Tarp

Quick answer

Use the Wing Pole 280cm Aluminum to support your tarp. Assemble the pole, attach it to the tarp grommet, and adjust the angle for stability.

Step-by-step setup

1. Assemble the pole: Connect the four sections of the Wing Pole 280cm Aluminum by inserting each joint fully. Ensure the sections are aligned and locked to prevent collapse. Check that each joint is fully seated before use.
2. Position the pole under the tarp: Place the pole vertically under the center of the tarp, with the rubber end on the ground. The rough tip should point up toward the tarp grommet. Choose a level spot to avoid the pole leaning.
3. Attach the tarp grommet to the pole tip: Slide the tarp grommet over the rough tip of the pole. The tip's texture helps grip the grommet and keeps it from sliding off. If the grommet is loose, use a small twist or tie a cord to secure it.
4. Adjust the pole angle: Tilt the pole slightly to create tension in the tarp. The rubber base helps it stay put. Adjust the angle until the tarp is taut and the pole is stable. Avoid over-tilting, which can cause the pole to slip.
5. Secure the tarp corners: Stake down the tarp corners to the ground using guylines. This prevents the tarp from flapping and keeps the pole from shifting in wind. Use at least two guylines for a stable setup.

Product details

• Wing Pole 280cm Aluminum: The Wing Pole 280cm Aluminum is made of 1.5 mm thick aluminum and breaks down into four shorter pieces for compact storage. This makes it portable for hiking trips while still being sturdy enough to support a tarp in moderate wind.